back To Top
Language

Wall Hanging with Embroidery

Materials

• Main body/Pocket (Outer fabric/Lining fabric): Cotton Duck (Beige) 61 cm x 30 cm x 1 pc.

• Tab: Cotton Fabric (Beige) 18 cm x 5 cm x 2 pcs.

• Adhesive interlining/white

• Lace: 1.5 cm width x 17 cm x 1 pc.

• Buttons: 1.5 cm diameter x 2 pcs.

• Ribbon

• Embroidery thread: 1 skein each


Template

WallHanging_ol_template_enのサムネイル
icon

Project sheet (pdf)

IC_E_21_WallHangingのサムネイル
icon

Making

1
picture

First, make the main body. Transfer the embroidery pattern onto the main-body's outer fabric with the bottom of the pattern located at 15 cm from the lower edge of the fabric. Do the embroidery as shown in the illustration. Do not transcribe the outlines of flower petals (shown as dotted lines on the pattern). Stitch the center of a flower first, then make loop-stitches with a ribbon for the portion of the flower petals.

picture

picture

picture

picture

2
picture

Then, make a pocket. Sew some lace onto the front of the outer fabric of a pocket. Put together the pocket's outer and lining fabrics wrong side out and stitch them together leaving an opening for reversing. Once the fabrics are stitched together, reverse them right side out and blind stitch the opening.

3
picture

Sew the pocket onto the main body.

4
picture

Put together the main-body's outer and lining fabrics with an adhesive interlining on each back with the wrong side out, and stitch them together leaving an opening for reversing. Once the fabrics are stitched together, reverse them right side out and blind stitch the opening.

5
picture

Make tabs. Put together the outer and backing fabrics of a tab wrong side out, and stitch them together leaving an opening for reversing. Once the fabrics are stitched together, reverse them right side out and blind stitch the opening. Make two of these.

6
picture

Sew the tabs onto the main body. Sandwich the main body with folded tabs and sew buttons to fix it as shown in the illustration.