back To Top
Language

Beginner’s Oven Glove

picture

Designed by

Debbie von Grabler-Crozier

Materials

Fabric:

• 30cm pretty fabric for the outer

• 30cm fabric for the lining

Interfacing:

• 30cm #279 80/20 cotton mix wadding (interfacing)

Everything Else:

• Small scrap of leather about 3cm wide x 15cm long

• Small rivet


Cutting

From the outer fabric:

・Cut two rectangles 25cm wide x 35cm long


From the lining fabric:

・Use the template to cut two mirror image oven glove shapes.

・Cut 40cm bias binding 3.5cm wide


From the interfacing:

・Cut two rectangles 28cm x 38cm


From the leather:

・Trim the leather scrap to 2cm wide x 15cm long


Template

Beginner_s Oven Glove_template_enのサムネイル
icon

Project sheet (pdf)

IC-S-139_Beginner_s oven gloveのサムネイル
icon

Making

1

Preparation:

picture

NB: Seam allowances are all 0.5cm unless otherwise stated. Please read all instructions through and assemble the equipment before beginning.

Make the bias binding: take your strip of fabric and use the bias tape maker to get the folds perfect.

2
picture

Pull the bias tape maker as you press the bias binding with the mini iron.

3
picture

Take the oven glove template and Water Erasable Marker and draw two mirror image glove shapes onto the right side of the fabric.

4
picture

Place the interfacing under the fabric and pin with the Wonder Pins.

5
picture

Quilt the glove shapes with your favorite quilting pattern.

tip: I love a random diagonal wave pattern. It is really easy to do and it can be done on almost any sewing machine.

6
picture

Cut the glove shapes out.

7
picture

With the right sides together, sew the gloves right around leaving the top edge open.

8
picture

Repeat this for the lining.

9
picture

Notch the curves on the glove.

tip: This will mean that the edge sits perfectly when it is turned out the right way. You do not have to do this for the lining.

10
picture

Turn the glove out the right way and stuff the lining down into the glove.

tip: The lining is inside out and the outer is the right way out. This way, the two wrong sides will be together inside the glove ‒ this also means that the glove is fully reversible.

11
picture

Sew around the top edge.

12
picture

Bind the top edge.

13
picture

Make a hole with the leather hole punch in the leather strip.

14
picture

Finish by attaching the leather hanger with the rivet.